null

Vindikta 1.5" Bagger Handlebars - 2014 Street Glide

$475.00
Write a Review
SKU:
AIM-VIN-Bagger-2014
Condition:
New
Weight:
20.00 LBS
Shipping:
$40.00 (Fixed Shipping Cost)

These unique Vindikta handlebars are constructed out of 1.5" tubing.   They are available in 12, 14, 16 and 18" heights and in black powdercoat or chrome.   

*All photos are of 14" handlebars.

Details of handlebar pictured (some measurements may vary depending on size ordered)

  • Width: 35″
  • Pull Back: 9″

 

New for the 2014 Harley-Davidson Street Glide and Ultra Glide motorcycles is our redesigned Bagger Bar created for the tight fairing clearances on these models. It has the same great features as before, such as made from 1.5″ diameter steel tubing and tapered top ends to allow for a full range of control placement. Our Bagger Handlebar also has easy fitment with the CVO model bikes. The bars are built to be used with Bat Wing fairings. They are pre-drilled for internal wiring and are notched to work with the Throttle by Wire system.

 

Please note: The 2014 Street Glide Bagger Handlebars will require the slightest of modifications to properly mount onto the 2014 Street / Ultra Glides. This modification is the light sanding of about 1/16th to 1/8th of an inch off the outside top corner of the bottom fairing cover. The modification is not noticeable when the bars are mounted. It is the only modification required, due to the larger 1.5″ diameter tubing. If you want to run the larger diameter tubing on the 2014 models, then this sanding cannot be avoided.

 

The fairing modification for the installation of the 2014 Street Glide bars consists of rounding off approximately 1/16 to 1/8″ of the corner indicated by the arrows below. The part is ABS plastic so there are no issues with painting and it can be rounded off with some light sanding. If you have one of the few models with the painted lower cover, then a small dab of touch up paint may be required. When installed, this corner is tucked up and under the fairing, out of sight. We want to be perfectly clear of what needs to be done to utilize these particular bars on our customer’s rides.

 

Care must be taken when placing orders for these bars. Because of the manufacturing process there are no refunds or changes once the order has been placed.